Carbon Mounting Strap Kit
Standard with all 25, 35, 50 Gallons Saddlemount Tanks
This kit includes: Two (2) frame mount powder coated J-brackets (rubber shielded) and two (2) rubber shielded, powder coated carbon steel strap assemblies. Kit can be purchased separately. NOTE: This mounting kit (quantity of two) also comes standard with the 100 gallon Saddlemount tank.
PART NO. AMK624-S
Stainless Steel Mounting Strap Kit (Upgrade option for AMK-624-C)
AMK-624-S Stainless Mounting Kit is available as an upgrade option from the Standard AMK-624-C. This kit is usable with saddlemount tanks that are less than 75 gallons. Mounting kit includes: two frame mount powder coated J-brackets (rubber shielded) and two rubber shielded, stainless steel strap assemblies. When exchanged as an upgrade option for a tank there is an additional charge of $24.00. Kit can be purchased separately. NOTE: This mounting kit can also be an upgrade for the 100 gallon saddlemount-(quantity of two will be needed).
PART NO. AMK624-C3
Carbon Mounting Strap Kit
Standard with all 75 & 100 Gallons Saddlemount Tanks
his kit includes a quantity of three (3) frame mount powder coated J-brackets and three (3) rubber shielded, powder coated carbon steel strap assemblies. Can purchase separately.
PART NO. AMK624-S3
Stainless Steel Mounting Strap Kit (Upgrade option for AMK-624-C/3)
AMK-624-S/3 Stainless Mounting Kit is available as an upgrade option from the AMK-624-C/3. This kit is usable with the 75 gallon saddlemount tank. Kit includes a quantity of three (3) frame mount powder coated J-brackets and three (3) rubber shielded, stainless steel strap assemblies. When exchanged as an upgrade option there is an additional charge of $36.00. Kit can also be purchased separately.
PART NO. ABK340-C
70 Gallon Upright Mounting Kit
The ABK-340-C Mounting Kit comes standard with the A-3070 and the A-4070 hydraulic upright tanks. Mounting kit includes: Mounting base panel, carbon steel strap assembly and rubber mounting pads. Also supplied is the ASK-200 Mounting Kit which includes four (4) pre-drilled powder coated mounting angles, plated bolts, washers, nyloc-nuts, four (4) plated springs, and four (4) pre-drilled mounting pads. Ships in one carton. Kit can be purchased separately.
PART NO. ABK340-S
70 Gallon Upright Mounting Kit (Upgrade Option for ABK-340-C)
The ABK-340-S Stainless Mounting Kit is available as an upgrade option from the ABK-340-C. This mounting kit is usable with the 70 gallon upright tanks. Mounting kit includes: Mounting base panel, stainless steel strap assembly and rubber mounting pads. Also supplied is the ASK-200 Mounting Kit which includes four (4) pre-drilled powder coated mounting angles, plated bolts, washers, nyloc-nuts, four (4) plated springs, and four (4) pre-drilled mounting pads. When exchanged as an upgrade option with a tank, there is an additional charge of $24.00 Ships in one carton. Kit can be purchased separately.
PART NO. AMB405
Single Mounting Base Panel
PART NO. AMK624
Single J-Bracket
PART NO. AMK305
J-Bracket Rubber
PART NO. ASA355-C
Single Carbon Steel Strap
Strap Length with T-bolt - 63"
Strap Length withouth T-Bolt - 57"
PART NO. ASA355-S
Single Stainless Steel Strap
Strap Length with T-bolt - 63"
Strap Length withouth T-Bolt - 57"
PART NO. CR6810
2" Channel Rubber
PART NO. ASK200
Chassis Mounting Kit
Standard with all 25, 35, 50 Gallons Saddlemount Tanks
This kit includes: Two (2) frame mount powder coated J-brackets (rubber shielded) and two (2) rubber shielded, powder coated carbon steel strap assemblies. Kit can be purchased separately. NOTE: This mounting kit (quantity of two) also comes standard with the 100 gallon Saddlemount tank.
PART NO. AMK624-S
Stainless Steel Mounting Strap Kit (Upgrade option for AMK-624-C)
AMK-624-S Stainless Mounting Kit is available as an upgrade option from the Standard AMK-624-C. This kit is usable with saddlemount tanks that are less than 75 gallons. Mounting kit includes: two frame mount powder coated J-brackets (rubber shielded) and two rubber shielded, stainless steel strap assemblies. When exchanged as an upgrade option for a tank there is an additional charge of $24.00. Kit can be purchased separately. NOTE: This mounting kit can also be an upgrade for the 100 gallon saddlemount-(quantity of two will be needed).
PART NO. AMK624-C3
Carbon Mounting Strap Kit
Standard with all 75 & 100 Gallons Saddlemount Tanks
his kit includes a quantity of three (3) frame mount powder coated J-brackets and three (3) rubber shielded, powder coated carbon steel strap assemblies. Can purchase separately.
PART NO. AMK624-S3
Stainless Steel Mounting Strap Kit (Upgrade option for AMK-624-C/3)
AMK-624-S/3 Stainless Mounting Kit is available as an upgrade option from the AMK-624-C/3. This kit is usable with the 75 gallon saddlemount tank. Kit includes a quantity of three (3) frame mount powder coated J-brackets and three (3) rubber shielded, stainless steel strap assemblies. When exchanged as an upgrade option there is an additional charge of $36.00. Kit can also be purchased separately.
PART NO. ABK340-C
70 Gallon Upright Mounting Kit
The ABK-340-C Mounting Kit comes standard with the A-3070 and the A-4070 hydraulic upright tanks. Mounting kit includes: Mounting base panel, carbon steel strap assembly and rubber mounting pads. Also supplied is the ASK-200 Mounting Kit which includes four (4) pre-drilled powder coated mounting angles, plated bolts, washers, nyloc-nuts, four (4) plated springs, and four (4) pre-drilled mounting pads. Ships in one carton. Kit can be purchased separately.
PART NO. ABK340-S
70 Gallon Upright Mounting Kit (Upgrade Option for ABK-340-C)
The ABK-340-S Stainless Mounting Kit is available as an upgrade option from the ABK-340-C. This mounting kit is usable with the 70 gallon upright tanks. Mounting kit includes: Mounting base panel, stainless steel strap assembly and rubber mounting pads. Also supplied is the ASK-200 Mounting Kit which includes four (4) pre-drilled powder coated mounting angles, plated bolts, washers, nyloc-nuts, four (4) plated springs, and four (4) pre-drilled mounting pads. When exchanged as an upgrade option with a tank, there is an additional charge of $24.00 Ships in one carton. Kit can be purchased separately.
PART NO. AMB405
Single Mounting Base Panel
PART NO. AMK624
Single J-Bracket
PART NO. AMK305
J-Bracket Rubber
PART NO. ASA355-C
Single Carbon Steel Strap
Strap Length with T-bolt - 63"
Strap Length withouth T-Bolt - 57"
PART NO. ASA355-S
Single Stainless Steel Strap
Strap Length with T-bolt - 63"
Strap Length withouth T-Bolt - 57"
PART NO. CR6810
2" Channel Rubber
PART NO. ASK200
Chassis Mounting Kit
